Results 1 to 6 of 6

Thread: removing durachrome top

  1. #1
    Inactive Member BlueBeetle's Avatar
    Join Date
    January 19th, 2006
    Posts
    108
    Follows
    0
    Following
    0
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Quoted
    0 Post(s)

    Post

    Okay, so I've removed all of the porcelain panels and the backsplash from the 90C, and I'm trying to get the top off. Do you have to get the range back off first? And do you disconnect the broiler box and thermowell beforehand?

  2. #2
    Inactive Member Pokey Roberts's Avatar
    Join Date
    May 6th, 2006
    Posts
    91
    Follows
    0
    Following
    0
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Quoted
    0 Post(s)

    Post

    My expierence is with the 61C taking the back off
    makes it easier. On the C you do not have to take
    the thermowell nor the broiler box off. In fact
    it is a lot easier to take the broiler box off
    after you have removed the top and turned it upside
    down. You do have to remove the gas lines to the
    broiler box and thermowell if you have not already
    done so.

    Pokey

  3. #3
    Inactive Member Gasseous's Avatar
    Join Date
    February 26th, 2006
    Posts
    118
    Follows
    0
    Following
    0
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Quoted
    0 Post(s)

    Post

    Beatle,

    Make sure that you disconnect the pilot light lines to both the thermowell and the burners too... These lines are easily broken...

    Gasseous

  4. #4
    Inactive Member BlueBeetle's Avatar
    Join Date
    January 19th, 2006
    Posts
    108
    Follows
    0
    Following
    0
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Quoted
    0 Post(s)

    Post

    Got the manual. Sometimes, it's good to hear the clarification from y'all. Also, there were two screws in the back that I was overlooking. Once I got the back off and the various gas lines unhooked, it was peachy keen and nastily greasy. :-)

  5. #5
    Inactive Member Joe Pieweed's Avatar
    Join Date
    September 27th, 2005
    Posts
    232
    Follows
    0
    Following
    0
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Quoted
    0 Post(s)

    Post

    BB:

    Congrats! (hope you know I wasn't scolding you, just ribbing you).

    Have at that grease!

    Joe P

  6. #6
    Inactive Member Joe Pieweed's Avatar
    Join Date
    September 27th, 2005
    Posts
    232
    Follows
    0
    Following
    0
    Mentioned
    0 Post(s)
    Tagged
    0 Thread(s)
    Quoted
    0 Post(s)

    Post

    BB!!!!!!

    C'mon, where is your manual??

    Joe P

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •